Polar Solvents Research Articles

Vitamin B1-based thiazol-2-ylidene-Ru(II) complexes: recyclable transfer hydrogenation catalysts in water.

The [(p-cymene)RuCl(κ2C,N-{CNHC-NH})]+X- (CNHC = thiazol-2-ylidene) complexes with a bidentate ligand (2: X = Cl and 3: X = PF6) were prepared by a one-pot reaction of vitamin B1 (VB1, 1), Ag2O and [(p-cymene)RuCl2]2. In the complexes, VB1 coordinates through C2 and the exocyclic N in the imino form with the κ2-(C,N) coordination mode. The complexes 2 and 3 are stable in the solid state, but slowly release p-cymene in solution. Furthermore, upon heating in polar solvents, 2 or 3 can be converted by ligand exchange reactions to produce [(L)3RuCl(κ2C,N-{CNHC-NH})]+PF6- (4: L = py).Robustness was improved remarkably for 4. The complex 4 is stable in the solid state and in solution. The complexes 2-4 have been identified by 1H and 13C{1H} 2D NMR spectroscopy and 2 and 4 were studied by X-ray crystallography. In an effort to develop a recyclable catalyst in water, 2-4 were evaluated for TH of ketones and aldehydes with an azeotropic mixture of HCOOH/Et3N in water. The complexes 3 and 4 exhibited very good catalytic activity and 4 could be reused nine times without significant loss of activity, giving a high turnover frequency (TOF50%(h-1) = 1286).

New strategy for structure rearrangement of thin-film composite (TFC) polyamide (PA) membranes and offering potential use in both aqueous and organic solvents

The purity of sodium hexafluorophosphate (NaPF6) is crucial for the preparation of electrolytes in manufacturing. We propose a simple process in order to induce membrane structure rearrangement process (SRP) by activating thin-film composite (TFC) membranes with polyamide (PA) structure and explore their potential green recycling application in concentrating sodium-ion batteries (SIBs) electrolyte. The method utilizes a solution containing polar aprotic solvent as the soaking and activating solution to swell and disintegrate the loosely cross-linked PA layer, and a non-solvent solidification solution complete the SRP, enhancing the permeability of the PA layer while maintaining high rejection rates for divalent ions. Subsequently, during the further treatment of the membrane surface in structure rearrangement, tert-butanol (TBA) is introduced into the aqueous solution to reconstruct the surface PA layer, further improving the permeability. The optimal D8010T10 achieved a permeation flux of 24.2 L m−2 h−1·bar−1, with rejection rates for sodium sulfate (Na2SO4), magnesium chloride (MgCl2), and magnesium sulfate (MgSO4) reaching 94.7 %, 98.4 %, and 99.1 % respectively. And the mechanism of SRP with different solvent is analyzed and explained through dissipative particle dynamics (DPD) simulations. This study provides a commercially viable approach for manufacturing high-performance membranes. The D8010T10 membrane achieves more than 90 % separation efficiency for sodium hexafluorophosphate (NaPF6) dissolved in different solvents, providing a potential solution for the concentration and recovery of NaPF6 in lab-scale, verified its potential use in the organic solvent nanofiltration (OSN) and a path way for waste membrane recycling and degrading use in the industry.

First-principles Study of Solvent Polarity Effects in the Menshutkin Reaction

First-principles Study of Solvent Polarity Effects in the Menshutkin Reaction

Swelling Behaviors of Natural Rubber/Solvent Systems Based on the Extended Modified Double Lattice Model

AbstractSwelling experiments are conducted on nonfiller natural rubber using four solvents (toluene, cyclohexane, tetrahydrofuran (THF), and methylethylketone (MEK)) over temperatures from 10 to 70 °C. Toluene, cyclohexane, and THF, classified as effective solvents, show swelling ratios between 3 and 7, influenced by the crosslink density of the rubber. MEK, however, has a lower ratio of 1.5 to 2. Temperature has a minor impact on swelling compared to the crosslink density. The study evaluates the Extended Modified Double Lattice (EMDL) model for its mixing contribution in polymer network swelling, aiming to improve the Flory–Hüggins (FH) model. The superiority of EMDL above FH is in the boundary condition at the unvulcanized state, the former aligning its interaction energy with values from solvent activities in primary linear polymer/solvent solutions, unlike the FH model. The EMDL model also accounts for oriented interactions in polar solvents through a secondary lattice, linking specific interaction energy with solvent dipole moments. The study observes a nonlinear correlation between crosslinking density and sulfur amount, proposing a nonrandom mixing at lower sulfur concentrations. This model shows strong alignment with experimental data, suggesting that replacing the FH model's mixing contribution with the EMDL model could improve results with minimal additional complexity.

Enhancing cement hydration by core/shell PS@SiO2 nanoparticles

Nanoparticles are widely used in construction. Here, nano-SiO2 is employed, in a way that prevents agglomeration of the nanoparticles, as pozzolanic material to improve Portland cement hydration and to improve the properties of the concrete. To explore the effect of nano-SiO2 and core-shell PS@SiO2 on cement properties, spherical polystyrene particles were prepared by dispersion polymerization of styrene in polar solvents and characterized by FTIR and E-SEM. The core shells PS@SiO2 were synthesized by Stöber method. The results showed an amorphous nano-SiO2 layer can be deposited uniformly on polystyrene particles. This core/shell structure was reducing the aggregation of nano-SiO2 effectively. It was shown that PS@SiO2 particles improved the concrete performances compared to blended cement with nano-SiO2 due to the agglomeration affect. Highlights • Core/shell PS@SiO2 nanoparticles with a uniform coating layer were prepared. • As-prepared nanoparticles were characterized by a variety of advanced methods. • Nanoparticles accelerate hydration and lower the spatial weight of cement paste. • Core/shell nanoparticles improve cement hydration much better than nano-SiO2.

Green Synthesis of Highly Fluorescent NCQDs: A Comprehensive Study on Synthesis, Characterization, Photophysical Properties, pH Sensing, Heavy Metal Detection, and Solvatochromic Behavior through Hydrothermal Method.

Solvatochromic studies in conjunction with NCQDs and analysis of material at different pH levels provide valuable insights about the process of metal ion sensing. Metal ion sensing holds significant importance in various fields like environment monitoring, biomedical diagnostics and various industrial purpose. The detection of metal ions by mixing the nitrogen-doped quantum dots (NCQDs) in the solvent at different pH levels for the analysis of the photoluminescence spectra is the unique property to achieve selective metal ion detection.In present study, the synthesis of NCQDs was performed by the use of flowers of Tecoma stans. The synthesis of NCQDs to best of our knowledge using flowers of Tecoma stans as natural carbon source via hydrothermal process has been done for the first time. The NCQDs exhibit absorption bands ranging from 190 to 450nm, with the energy band gap varying from 3.55 to 5.42eV when mixed with different solvent such as, 1-4 dioxane, acetone, acetonitrile, ethyl- acetate, ethanol, methanol and toluene. The fluorescence spectra exhibited highly intense range from approximately 390 to 680nm across various solvents. XRD analysis further confirmed the crystalline nature of the particles with an average size of 6.96nm. Different peak positions of the FTIR spectra support functional groups having C-H stretching, C = O (carbonyl) stretching, and C = C stretching vibrations.In the study a notable solvatochromic shift was observed, indicating sensitivity to change in solvent polarity. Additionally, the investigation of the ratio of ground to excited state dipole moment based on solvatochromic shift yielded a value of 3.30. This provide valuable information about optical and electronic properties of NCQDs. Overall, our study sheds light on the unique properties of NCQDs synthesized from Tecoma stans flowers and their potential applications in metal ion sensing, pH probing, and solvent polarity studies.

The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy.

Solvation shells strongly influence the interfacial chemistry of colloidal systems, from the activity of proteins to the colloidal stability and catalysis of nanoparticles. Despite their fundamental and practical importance, solvation shells have remained largely undetected by spectroscopy. Furthermore, their ability to assemble at complex but realistic interfaces with heterogeneous and rough surfaces remains an open question. Here, we apply vibrational sum frequency scattering spectroscopy (VSFSS), an interface-specific technique, to colloidal nanocrystals with porous metal-organic frameworks (MOFs) as a case study. Due to the porous nature of the solvent-particle boundary, MOF particles challenge conventional models of colloidal and interfacial chemistry. Their multiweek colloidal stability in the absence of conventional surface ligands suggests that stability may arise in part from solvation forces. Spectra of colloidally stable Zn(2-methylimidazolate)2 (ZIF-8) in polar solvents indicate the presence of ordered solvation shells, solvent-metal binding, and spontaneous ordering of organic bridging linkers within the MOF. These findings help explain the unexpected colloidal stability of MOF colloids, while providing a roadmap for applying VSFSS to wide-ranging colloidal nanocrystals in general.

Ti3AlC2 MAX Phase Modified Screen-Printed Electrode for the Fabrication of Hydrazine Sensor

Hydrazine is considered a powerful reducing agent and catalyst, showing diverse applications in agricultural industries, toxic degradation research, and wastewater management. Additionally, hydrazine can trigger some specific reactions when combined with suitable oxidants. Due to its highly polar nature, hydrazine can easily dissolve in alcohol, water, and various other polar solvents. Therefore, it can be extensively utilized in different areas of application and industries such as rocketry and various chemical applications. Despite its beneficial properties, hydrazine is unstable, posing significant risk due to its highly toxic nature. It is extremely hazardous to both human health and the environment. It can cause various illnesses and symptoms such as dizziness, temporary blindness, damage to the central nervous system, and even death when inhaled in sufficient quantities. Therefore, it is highly important to monitor the level of hydrazine to prevent its toxic and hazardous effects on human beings and the environment. In the present study, we discuss the simple fabrication of a disposable cost-effective and eco-friendly hydrazine sensor. We used a screen-printed carbon electrode, i.e., SPCE, as a base for the construction of a hydrazine sensor. The Ti3AlC2 MAX has been used as a suitable and efficient electrode material for the fabrication of disposable hydrazine sensors. We modified the active surface of the SPCE using a drop-casting approach. The resulting Ti3AlC2 MAX modified SPCE (Ti3AlC2@SPCE) has been utilized as an efficient and low-cost hydrazine sensor. Cyclic voltammetry, i.e., CV, and linear sweep voltammetry, viz., LSV, was employed as a sensing technique in this study. The optimization of pH and electrode material loading was conducted. The Ti3AlC2@SPCE exhibited excellent sensing performance toward hydrazine oxidation. A reasonable detection limit (0.01 µM) was achieved for hydrazine sensing. The fabricated sensor also demonstrated a reasonable linear range of 1–50 µM. This work provides the design and fabrication of simple disposable Ti3AlC2@SPCE as a suitable electrode for the determination of hydrazine using LSV technology.

Synthesis, Spectral Characteristics, Sensing Properties and Microbiological Activity of New Water-Soluble 4-Sulfo-1,8-naphthalimides

A new water-soluble polyamidoamine (PAMAM) dendrimer modified with 4-sulfo-1,8-naphthalimide (DSNI) and its monomeric structural analogue (MSDI) were synthesized. Their photophysical properties were investigated in organic solvents of different polarities and aqueous solutions. The effect of pH on fluorescence intensity was determined. It was found that the dendrimer emits blue fluorescence in an acidic medium, which is quenched in an alkaline environment. This phenomenon is due to the possibility of suppression of nonradiative photoinduced electron transfer in acidic media. The influence of different metal ions (Cu2+, Pb2+, Sn2+, Sr2+, Mg2+, Ba2+, Co2+, Hg2+, Zn2+, Ni2+, Fe3+, Al3+) and anions (CN−, S2−, S2O52−, HPO42−, H2PO4−, F−, CH3COO−, NO2−, CO32−, SO42−) on the intensity of the emitted fluorescence was studied. Quenching was only found in the presence of Cu2+. This makes the dendrimer suitable for determining copper ions in water solutions in the presence of other metal ions and anions. Additionally, DSNI was used as a ligand to obtain a stable copper complex, the structure of which was investigated by electron paramagnetic resonance (EPR), infrared spectrum, and elemental analysis. Two copper ions were found to form a complex with one dendrimer. The in vitro microbiological activity of the new compounds against bacteria Pseudomonas aeruginosa and two viruses HRSV-2 and HAdV-5 was investigated. With a view to obtaining antibacterial and anti-viral textiles, cotton fabrics were treated with the three compounds, and then their activity against the same microbial strains was investigated. It was found that the microbiological activity was preserved after the application of the new compounds to the cotton fabrics.

Stable solvatochromic light-emitting diodes and their potential for color temperature adjustment of white LEDs

A viable technology for liquid phosphor-based light-emitting diodes (LEDs) with emission color tuneability is described. These devices are based on Tris(bipyridine)ruthenium(II) chloride but can be constructed from other similar metal coordination charge transfer complexes. The Frank-Condon excited state generated upon the absorption of blue (450 nm) pump photons has a large electric dipole moment due to intramolecular metal-to-ligand charge transfer from the ruthenium atom to one specific bipyridyl ligand. Polar solvents respond to the dipole field creating a solvatochromic shift that is solvent dependent. The devices were fully sealed in either a long path length or a short path length configuration. The latter encapsulating the luminescing medium in hollow silica spheres that can be easily applied like a slurry on top of InGaN/GaN LED dies. The devices were optically, thermally and environmentally stable. Also discussed is the possibility of using solvatochromic emitters for achieving color temperature tuneability in white LEDs.

Pillared graphene oxide frameworks for the adsorption and separation of polar protic and aprotic liquid solvents: The cases of pure water, methanol, dimethyl sulfoxide, and dimethyl sulfoxide-water mixtures.

Potential applications of previously synthesized pillared graphene oxide frameworks with phenyldiboronic acid linkers in the field of the adsorption and separation of polar protic and aprotic liquid solvents have been systematically explored using grand canonical Monte Carlo simulations. Particular attention was initially paid to the adsorption of pure liquid water, methanol, and dimethyl sulfoxide. The results obtained a significant increase in the isosteric heat of adsorption at low uptake in the case of dimethyl sulfoxide, which is about 17.9 and 26.8kJ/mol higher than the values corresponding to methanol and water adsorption. These findings indicated that from a thermodynamic point of view, these pillared graphene oxide frameworks could be used in the separation of dimethyl sulfoxide-water liquid mixtures. Systematic grand canonical Monte Carlo simulations were then subsequently performed for dimethyl sulfoxide-water mixtures, with a low dimethyl sulfoxide concentration. The calculated values of the separation selectivity indicate that these materials could have potential applications in the separation of these mixed liquid solvents. Molecular dynamics simulations performed for a representative adsorbed mixture have revealed a substantial slowing down of the dynamics under confinement, particularly in the case of the hydrogen bonds formed between water and dimethyl sulfoxide.

Theoretical spectroscopic electronic elucidation with polar and non-polar solvents (IEFPCM model), molecular docking and molecular dynamic studies on bendiocarb -antiallergic drug agent

The potential antiallergic compound bendiocarb was studied theoretically by polar and non-polar (six) solvents (IEFPCM model) by quantum chemical DFT calculations. Rotational potential barriers were estimated for water, acetone, THF, chloroform, benzene, and toluene are 12.62, 12.45, 12.55, 12.69, 12.74 and 12.57 kJ/mol. Analysis was done on the variations in geometries brought about by the electronegative atom’s replacement as well as the intramolecular interactions caused by the benzodioxol ring. NBO analysis as well as geometrical equilibrium have been performed using DFT employing the B3LYP technique with the 6-311G++(d, p) basis set. In vibrational analysis, CH stretching of bendiocarb was theoretically estimated within 3207–3181 cm−1 (gas), 3207–3184 cm−1 (acetone and water), 3207–3182 cm−1 (benzene and toluene), and 3207–3183 cm−1 (chloroform and THF) due to CN vibrations is challenging because of the overlapping and appearance of multiple bands in similar regions. Energy gaps for Bendiocarb in different solvents for water (5.719 eV), acetone (5.716 eV), THF (5.722 eV), chloroform (5.724 eV), benzene (5.731 eV), toluene (5.730 eV), and gas phase (5.746 eV). Lipinski’s rule of five was exploited to guide research on drug similarity and oral action. Using docking simulation against the antiallergic protein, a binding energy of −5.22 kcal/mol, 4P5M has been examined. The protein 4P5M exhibits variations between 0.12 and 0.155 nm for RMSD in molecular dynamic simulation. One can infer information about the pharmacokinetic features of the target molecule from its drug similarity, absorption, distribution, metabolism, excretion, and toxicity properties.

Silsesquioxane Cages under Solvent Regimen: The Influence of the Solvent on the Hydrolysis and Condensation of Alkoxysilane.

This study investigates the formation mechanisms of oligomeric phenyl silanols, focusing on polyhedral oligomeric silsesquioxane (POSS) and double-decker silsesquioxane (DDSQ) derivatives. Combining literature reports and crystal structures of solvated derivatives obtained in our laboratory, we show that the solvent choice significantly influences their structures. POSS-based silanols prefer aprotic solvents like THF, preserving dimerization, while double-deckers form stable architectures in protic solvents like isopropanol. This discrepancy arises from different stabilization mechanisms. Our findings enhance our understanding of hydrolytic condensation involving trimethoxyphenylsilane and suggest aprotic solvents for efficient reactions with POSS-based silanols.

Oriented Linear Self-Assembly of Colloidal Nanocrystals through Regioselective Formation of Hydrogen-Bonded Supramolecular Bridges.

The linear assembly of nanocrystals (NCs) with orientational order presents a significant challenge in the field of colloidal assembly. This study presents an efficient strategy for assembling oleic acid (OAH)-capped, faceted rare earth NCs─such as nanorods, nanoplates, and nanodumbbells─into flexible chain-like superstructures. Remarkably, these NC chains exhibit a high degree of particle orientation even with an interparticle distance reaching up to 15 nm. Central to this oriented assembly method is the facet-selective adsorption of low-molecular-weight polyethylene glycol (PEG), such as PEG-400 (Mn = 400), onto specific facets of NCs. This regioselectivity is achieved by exploiting the lower binding affinity of OAH ligands on the (100) facets of rare earth NCs, enabling facet-specific ligand displacement and subsequent PEG attachment. By adjusting the solvent polarity, the linear assembly of NCs is induced by the solvophobic effect, which simultaneously promotes the formation of hydrogen-bonded PEG supramolecular bridges. These supramolecular bridges effectively connect NCs and exhibit sufficient robustness to maintain the structural integrity of the chains, despite the large interparticle spacing. Notably, even when coassembling different types of NCs, the resulting multicomponent chains still feature highly selective facet-to-facet connections. This work not only introduces a versatile method for fabricating well-aligned linear superstructures but also provides valuable insights into the fundamental principles governing the facet-selective assembly of NCs in solution.

A multidimensional study for design functional foods: Chemical profiling, antioxidant potential, enzyme inhibition, and cytotoxic effects of Alkanna tubulosa extracts

This study focuses on the extraction of plant species Alkanna tubulosa growing in Turkey, using solvents of different polarities (ethyl acetate, ethanol, ethanol/water, and water) and determining their chemical composition and biological activity. The extracts were subjected to qualitative LC-MS/MS analyses, which resulted in the identification of even 50 different secondary metabolites in some extracts. The existence of total phenols and flavonoids was determined. of total phenols and flavonoids was determined. The antioxidant capacity was evaluated by various in vitro assays, as well as the enzyme inhibitory capacity against cholinesterases (AChE and BChE), tyrosinase, α-amylase, and α-glucosidase, as well as human isoforms of carbonic anhydrase. In addition, the cytotoxic activity of the extracts was also examined. The results showed that the ethanol/water extract showed the strongest antioxidant activity (225.55 mg TE/g extract in ABTS and 381.14 mg TE/g extract in CUPRAC), probably due to the high total phenol (105.17 mg GAE/g extract) and flavonoids (20.12 mg RE/g extract) content, while the ethanol extract showed the strongest enzyme inhibitory potential. These chemical and biological findings provide valuable insights for potential future products based on the A. tubulosa extracts which could be used in various industries.

Concerning for the solvent-polarity-dependent conformational equilibrium and ESIPT mechanism in Pz3HC system: A novel insight

In this report, we propose a new insight into the interaction between the solvent-polarity-dependent conformational equilibrium and excited state intramolecular proton transfer (ESIPT) behavior of Pz3HC system in four different polar solvents (polarity order: ACN > THF > TOL > CYC). Using quantum chemistry method, we first announce a coexistence mechanism between Pz3HC-1 and Pz3HC-3 in the ground state in four solvents based on the Boltzmann distribution. In particular, Pz3HC-1 is the principal configuration in non-polar solvent, but Pz3HC-3 is the principal configuration in polar solvent. In addition, the simulated fluorescence spectra interprets the negative solvatochromism effect of Pz3HC-1 and Pz3HC-3 in four solvents. The evidence from intramolecular hydrogen bonding (IHB) parameters and electronic perspective collectively confirms the light-induced IHB enhancement and intramolecular charge transfer (ICT) properties in Pz3HC-1 and Pz3HC-3, which raises the likelihood of the ESIPT process. Combining the calculation of potential energy curve (PEC) and intrinsic reaction coordinate (IRC), we demonstrate that the ESIPT ease of Pz3HC-1 in different polar solvents obeys the order of CYC > TOL > THF > ACN, while the order of ESIPT ease in Pz3HC-3 is opposite. Notably, the ESIPT process of Pz3HC-3 in CYC solvent is accompanied by the twisted intramolecular charge transfer (TICT) process. In addition, we also reveal that the enol* and keto* fluorescence peaks of Pz3HC-3 in CYC solvent are quenched by ISC and TICT process, respectively. Our work not only provides a satisfactory explanation of the novel dynamics mechanism for Pz3HC system, but also brings light to the design and application of new sensing molecules in the future.

Silica Surface Coating of Blue Light-Emitting CsPbBr3 Nanoplatelets for Improved Stability in Polar Solvents and Long-Term Storage

Silica Surface Coating of Blue Light-Emitting CsPbBr₃ Nanoplatelets for Improved Stability in Polar Solvents and Long-Term Storage

Tandem hydrogenation/hydrogenolysis of furfural to 2-methylfuran over multifunctional metallic Cu nanoparticles supported ZIF-8 catalyst

Catalytic transfer hydrogenation (CTH), that employs protic solvents as hydrogen sources to alleviate the use of molecular hydrogen H2, has gained great attention. This work, reports multifunctional, metallic Cu nanoparticles supported ZIF-8 material for CTH of furfural to a highly valued fuel additive, 2-methylfuran (2-MF) using 2-propanol. Of all as-synthesized xCu(yM)/ZIF-8 catalysts with varied NaBH4 concentration (yM) and Cu loading (x), 11Cu(1.5 M)/ZIF-8 exhibited higher catalytic activity with > 99 % FAL conversion and 93.9 % 2-MF selectivity. This is ascribed to its high specific surface area, and existence of optimum amount of Lewis acid-base sites along with Cu0 species, which are responsible for hydrogenation of furfural to furfuryl alcohol and subsequent hydrogenolysis to produce 2-MF. The present work reports a highly efficient and stable, metal-MOF hybrid material for CTH of FAL to 2-MF, which is one among the best reports available in literature, therewith suggests a promising approach for bio-oil upgradation.

Production and Physicochemical Characterization of the Gel Obtained in the Fermentation Process of Blue Corn Flour (Zea mays L.) with Colletotrichum gloeosporioides

Food gels are viscoelastic substances used in various gelled products manufactured around the world. Polysaccharides are the most common food gelling agents. The aim of this work was the production and characterization of a gel produced in a blue corn flour fermentation process, where different proportions were used of blue corn (Zea mays L.) flour and Czapek Dox culture medium (90 mL of culture medium with 10 g of blue corn flour, 80 mL of culture medium with 20 g of blue corn flour, and 70 mL of culture medium with 30 g of blue corn flour) and were fermented for three different durations (20, 25, and 30 days) with the Colletotrichum gloeosporioides fungus. A characterization of the gel was carried out studying the rheological properties, proximal analysis, toxicological analysis, microscopic structure, and molecular characterization, in addition to a solubility test with three different organic solvents (ethanol, hexane, and ethyl acetate, in addition to water). The results obtained showed in the rheological analysis that the gel could have resistance to high temperatures and a reversible behavior. The gel is soluble in polar solvents (ethanol and water). The main chemical components of the gel are carbohydrates, especially polysaccharides, and it was confirmed by FT-IR spectroscopy that the gel may be composed of pectin.

Reactivity and detailed reaction mechanism of quasi‐tetrahedral o‐azophenylboronic acid

AbstractQuasi‐tetrahedral o‐azophenylboronic acid (azoB‐ROH), which contains the protic solvent ROH, is a key species in the colorimetric sensing of saccharides by o‐azophenylboronic acid (azoB). In this study, we compared the reactivity of azoB‐ROH with that of trigonal azoB and tetrahedral o‐azophenylboronate (azoB‐OH−), and clarified the reaction mechanism of azoB‐ROH with cis‐1,2‐cyclopentanediol and D‐glucose. Analysis of the kinetics of the reactions of azoB with cis‐1,2‐cyclopentanediol and D‐glucose in DMSO:water = 1:9 and azoB with cis‐1,2‐cyclopentanediol in tetrahydrofuran containing a small amount of methanol revealed that there was not much difference in the reactivity of azoB‐H2O and azoB‐OH−, although the reactivity of azoB was higher than that of azoB‐MeOH, that is, the reaction mechanism of azoB‐H2O was essentially the same as that of azoB‐OH−.